Article 6. Plumbing, Drain Layers, and Gas Fitting Code
Contents
17.6.1. Adoption of the Uniform Plumbing Code, 2012 Edition, as the Plumbing and Gas Fitting Code, with certain additions and deletions.
The Uniform Plumbing Code, published by the International Association of Plumbing and Mechanical Officials (IAPMO), 2012 Edition, including the Appendixes and Installation Standards thereto and including the Uniform Plumbing Code’s latest edition of Table 1401-1, excluding Sections 102.1, 102.2, 102.3, 102.3.1, Table No. 103.4: Plumbing Permit Fees, 422.1, 422.1.1,422.2, 422.3, 422.4, 422.4.1, 422.5, Part II of Chapter 7: Building Sewers, Sections 609.4, 807.4, 1014.0, 1015.0, 1210.1.5 Appendix F, Appendix H, Appendix L 6.0, Appendix L 7.0, and except for amendments set forth in this section, is by reference incorporated herein and made a part of this Code as though set forth at length herein, including all amendments as set forth in Resolution No. 159-2014, of the Board of County Commissioners of Sedgwick County, Kansas, as subsequently set forth within the Unified Building and Trade Code as adopted within of this Chapter. This Code and all amendments shall hereafter be known as the Plumbing and Gas Fitting Code of the City of Bel Aire.
17.6.2. Availability of copies.
One copy of said standard code, along with the amendments set forth in that Resolution of the Sedgwick County Commission as described in 17.6.1 above, as currently incorporated into the Unified Building and Trade Code which is adopted through Article 11 of this Chapter, have been and are now filed in the office of the City Clerk, and the said code is adopted and incorporated as if fully set out herein at length as authorized in the manner provided by K.S.A. 12-3009, et seq.
17.6.3. Effective date.
The above adopted code shall be phased in from the date of its adoption until July 1, 2016, to allow for conclusion of projects being completed in conformance with the previously adopted standardized code. New projects may be licensed and permitted using either the above described code or the formally applicable code, whichever is most appropriate to the project and the stage of the development of the project in the discretion of the Code Enforcement Officer. On and after July 1, 2016, no project shall be approved except in conformance with the above described code.